Packaging and Labeling Standards for Transporting LiFePO₄ Energy Storage Batteries

Keywords: LiFePO4 battery packaging, lithium battery transport label, UN carton, lithium battery shipping box, dangerous goods label.

Introduction

Correct packaging and labeling are essential to prevent short circuits, physical damage, and accidental ignition during transportation. This article covers the packaging standards required by UN, IATA, and IMDG regulations for LiFePO₄ energy storage batteries.

1. Primary Packaging Requirements

Each battery must have:

Terminal insulation (electrical tape or plastic cover)
Anti-shock foam protection
Heat-resistant inner liners
Leak-proof and anti-crush material

2. Outer Packaging Requirements

✔ UN-certified carton with UN mark
✔ Sturdy double-layer corrugated box
✔ Batteries cannot move inside
✔ Must pass 1.2m drop test

3. Required Transport Labels

Class 9 Dangerous Goods label
Lithium battery handling label
UN3480 or UN3481 code depending on product type
Manufacturer information
Gross weight marking

4. Key Risks Prevented by Proper Packaging

Short circuit
Fire hazards
Compression damage
Shock and vibration damage
Misidentification by customs

Conclusion

Proper packaging and labeling not only ensure legal compliance but also protect the cargo during transportation. It directly impacts the safety and reliability of international shipments.